Best Jeep Tail LED Lights In [year]

During our research, we found that there various different manufacturers offering tail LED lights. Find the right tail light for Jeep could get confusing. After a lot of research, we created a list of seven Best Jeep tail LED lights and out seven Sunpie Smoked Tail LED lights is highly recommended. In case you want to learn more about the light before making the purchase go to our buyer’s guide section.

Best Jeep Tail LED Lights

1. Sunpie Smoked 

Sunpie presents us with Smoked Tail LED lights for the rear portion. With their aesthetic look, you are sure to give an appealing appearance to your jeep. The package contents include two LED lights that can play three modes. The three modes are namely the brake, reverse, and running light. So, if you are having a Jeep Wrangler JKU or JK version with models in between 2007-2017, you can consider buying these efficient tail LED lights.

The best part with these Sunpie tail LED lights is the simple installation. It is very quick to install them with plug and play mechanism. After attaching the resistor, you just need to plug the cable and you are done with the major part. Well, the light is rightly built with the hooks which you can attach to the body of the jeep for maximum hold. After that, a little screwing is required to complete the process.

Furthermore, they perfectly fit the different jeep models. So, you need not worry about any extra hassle you face installing a third-party accessory. The item is specifically made keeping in mind the US vehicles’ requirements and thus they may not be that perfect for European standards. The overall outer material is built with durable ABS plastic housing. However, it is mentioned that you need to add load resistors in case the lights flicker.

Bottom Line

If you are looking to buy tail LED lights that can even play daytime running mode, do consider buying tail lights by Sunpie. It is the best jeep wrangler tail lights. All the features are worth noting except you need to use it load resistors to enhance lifespan.

2. LX-Light Dot Approved 4D

Looking for precise and fancy looking LED lights? These are Dot Approved Tail LED lights by LX-Light that can best fit the JK version of Jeep Wrangler 2007-2017 models. This LED light uses a 4D lens for reverse lighting. Well, these lights also use running, brake, and reverse mode. For installation, you just need to simply plug-play the light with no chance of car circuit wires. Their lifespan is also great at above 50000 hours. Jeep tail lights.

Looking for precise and fancy looking LED lights? These are Dot Approved Tail LED lights by LX-Light that can best fit the JK version of Jeep Wrangler 2007-2017 models. This LED light uses a 4D lens for reverse lighting. Well, these lights also use running, brake, and reverse mode. For installation, you just need to simply plug-play the light with no chance of car circuit wires. Their lifespan is also great at above 50000 hours.

So, if you own any Jeep Wrangler, these lights may go best in terms of both look and quality. It further gives amazing brightness with an input voltage of 9-16v and power of 30W reversing design. Their dazzling lights give a clear view of the surroundings. You also need not add the load resistors as these lights are properly designed for the major flickering issue found with other lights. These lights are already integrated with hyper flash resistors.

The LED OSRAM chips are used in the lights to have upgraded technology for strong penetration. The material of their lamp cup is made with PMMA+PC with a certification of E-MARK and DOT. So, you will be totally safe from indulging in any legal issues. EMC is also built inside these LED lights with an efficient IP grade IP67. Moreover, an installation guide is also provided with the package to make you feel free for installation.

Bottom Line

These are one of the best DOT approved LED tail lights with extensive features. You can go with the item if your Jeep Wrangler also fits the version mentioned.

3. LITE-WAY Smoked 

These are Jeep Wrangler JK version smoked LED tail lights by Lite-Way. It easily fit the jeep JK models between 2007-2017. These two lights run in four modes namely the turn signal, running, reverse, and brake. However, the overall look is simple and you cannot say it has a sporty look. They are also DOT approved to make you relax from any legal issues. The plug-play installation makes it a matter of a few minutes to complete the installation process.

So, if you are looking for budget-friendly Jeep JK LED tail lights, these may be the best to go for. Without even changing the original car screws, you just need to add the load resistors, plug-play with internal and do some external screwing for proper installation. Furthermore, these lights come up with excellent durability, visibility, and reliability. There is an inbuilt circuit protection system for the lights to give an efficient performance. And, if you live in the US, these lights are professionally made for the state.

Their simple look with four modes helps your Jeep Wrangler JK version to feel smooth, safe, and simple. Its bulb's lifespan is mentioned at 50,000 hours. Also, they do come with waterproof rating IP68. We tested it in wet conditions and lights don't get affected water. Their clean finishing is made up of durable ABS plastic housing. We tested it for impact from small stones, it survived it. Yes, there was a little scratch but it was under extreme conditions.

Bottom Line

Lite-Way offers one of the budget-friendly options if you are looking for LED taillights and want to start with a budget pack. Only thing is it is suitable for JK wrangler. If you need jeep YJ LED tail lights you will have to with other tail lights.

4. Liteway Jeep Wrangler Taillights

Lite-Way comes up with Jeep Wrangler JK version 2007-2017 models. It also consists of four lighting modes namely the reverse, running, turn signal, and brake. They also use the plug and play installation system to consume just your few minutes for the process. Their glossy and smoky finish gives a perfectly clean look to the jeep. The LED lights are DOT approved to be compliant with the US for effective reliability and durability to be used in the state. 

There is also an inbuilt circuit protection mechanism which further helps remove the flickering issue. Without any screwing requirement, you just need a few minutes for installation. Both these lights are waterproof. Its red light refers to ‘turn signal’, ‘running’, and ‘brake’ whereas white light is used for ‘reverse’. Their material is made up of high-quality ABS plastic housing with a clear PMMA lens.

These lights are having a somewhat rugged look to give a clean finish to the Jeep Wrangler JK. The lights also provide a very classy look at the overall Jeep riding. Its voltage is 12V and thus uses low consumption. You need not worry about the short life as both these lights come up with an enhanced lifespan. Their engineering with smooth line construction also makes them perfectly adjustable with the Jeep Wrangler JK.

Bottom Line

This may be best fit by Lite-Way Jeep Wrangler JK version LED taillights if you are looking for one with a rugged style along with a budget-friendly option.

5. Xprite Smoke Lens 4D 

Xprite presents two rear smoke lens 4D LED tail lights with DOT approval. They perfectly fit the Jeep Wrangler JK JKU version between 2007-2018 models. The lights further make an excellent look at the jeep as it is also installed with a sinister smoky lens. It features a backup and all-red turn signal with faster off/on response. They are made with high-quality ABS plastic housing and PMMA smoke lens. These lights are moreover shockproof and waterproof with an IP67 rating.

Its bulbs feature great brightness and endurance with a life span of more than 50000 hours. So, there will be zero worries regarding the life span of bulbs. You just need about 10-15 minutes for proper installation. The lights are bright and give a very clear look while in operation. You are getting these power-efficient lights at an affordable price. Your back of Jeep Wrangler JK will be perfectly brightened using the lights.

The lights are built with a resistor so you also need not add extra load resistors. As they are 4D, so all the brightness it is providing is definitely even in a harsh dark environment. The lights consist of three light modes namely the reverse light, brake light turn signal, and running lights. The total life span mentioned is about 50000 hours along with less power consumption as compared to other Tail LED lights.

Bottom Line

Xprite is one of the best options to go with exclusive features. Although it is expensive, the worth noting features including quality housing is considerable.

6. Xprite with Smoke Lens

These are Xprite Tail LED lights that are built with a smoke lens and amazing design. These lights are made to fit the Jeep Wrangler JK JKU 2007-2018 models. Well, the lights are having a design of the G3-Diamond Series. Unlike usually LED tail lights, they are having a fast on/off response with increased visibility. The fantastic diamond shape of lights also helps to enhance the brightness and make them super illuminated lights.

The lifespan is given at about 50000 hours. Also, there is an inbuilt precision current constant driver chip with the LED tail light. There are almost four light modes you can use including the reverse, turn signal, brake, and running. Furthermore, the plug and play features make them a breeze to install which will hardly require ten minutes for completing the whole process. However, if you are not that technical, then it will take a total of 15 minutes to complete the installation.

With their lower power consumption, Xprite LED taillights are also efficient to use. They use a voltage DC12V with red and white colors for different modes. The overall LED light is weatherproof with an IP67 rating. It is Xprite’s Rival Series with Cree LED chips. To make its performance worthy, the lens is smoke PMMA. You need not consider material issues as it is made with high quality and reliable ABS plastic material.

Bottom Line

This is an upgraded version by Xprite LED tail lights containing a lot of effective features. These lights may be the perfect option if you are having a good budget.

7. Matrix Design by Online LED Store

The Matrix Design may throw a very classy look to your jeep. It will give a perfect illumination with great designs in late night. These DOT approved lights also use plug-play mechanism for simple installation. They go best with the Jeep Wrangler JK JKU 2007-2018 models. The great part with lights is the amazing illumination and brightened design they give in nights. Well, you need not add load resistors here because they are already built with resistors to remove the problem of flickering.

As compared to the usually LED tail lights, these lights are bigger and brighter. Along with the beautiful matrix layout, there are super bright reverse lights, side reflectors, and inbuilt resistors to ensure reliable performance. Moreover, the structure is hard and weatherproof along with the IP67 rating. So, there will be nothing that these lights can’t bear according to different environmental conditions.

However, you may find them a little expensive but when we talk on terms of quality and other features, it is worth noting. There are 27 LEDs installed per unit. And, all its housing is IP67 waterproof. Its integrated resistors also help in easy installation with no more hassle creating wires. You will also love the great performance shown by lights even in harsh conditions.

Bottom Line

These LED tail lights with Matrix Design brightness may go perfect if you also want that super illuminated classy look for your Jeep Wrangler.

Buyer’s Guide- What To Consider While Buying?

There are varieties of aspects that must be considered for selecting the ideal Jeep LED Tail Lights. Some of the aspects are acknowledged below in brief that will help you in selecting your coolest tail lights that will reach your demands. Commonly it is observed that buyers don't acknowledge what are the products they should buy. Buyers randomly purchase the product based on reviews and features listed by manufacturers. There are some insides and aspects that must be considered before purchasing a Jeep LED Tail Lights.

1. EASY INSTALLATION

Probably almost all the Jeep LED Tail Lights to have Plug & Platy installation. Henceforth they are very easy to install. There are several tail lights in the market that require additional tools and modifications for installation. In these types of additional changes, you will get frustrated and confused. Henceforth it is highly recommended to choose only Plug & Play installation. These Plug & Play includes a high-quality built-in resistor. And you just need to plug the Jeep LED Tail Lights into the connector and the job is done. Plug & Play is one of the best features that you require to ease your installation process. Henceforth, whenever you choose Jeep LED Tail Lights chooses them with Plug & Play installation.

2. GLOW

Jeep LED Tail Lights don't just provide convince of driving to the user. But also for the safety of the user and driver. These are the important safety item of a Jeep. It should be bright enough not only for the user but also for other drivers. LED'S are very effective and bright bulbs. Hence it is only recommended to choose Jeep LED Tail Lights. Not any other bulb Tail light because safety is the most crucial feature. Money can be claimed and retained at any time. But life is the only thing that can't be retained once gone. Henceforth for the safety of your family, yourself and other drivers, you must choose tail lights wisely. In recent years many road and off-road accidents are caused due to bad-quality tail lights. You will have to keep an eye on the Lumen Output of the tail light. The high amount of Lumen output depicts higher brightness. Henceforth Jeep Tail Lights must be LED'S and no other bulbs.

3. DURATION

LED Tail Lights are believed to have a much longer lifespan. As compared to the ancient incandescent bulbs. One of the main aspects is that most of the LED's are waterproof. And henceforth they don't get contact with water and lifespan is maintained. Unlike the incandescent bulbs, LEDs don't have a fragile filament. These fragile filaments tend to heat up and catch fire. Due to the non-presence of fragile filaments LED's live 10x longer. Increased lifespan not only provides user satisfaction but proper money usage. But in some cases of excessive heat and moisture contact LED's tend to get damaged. Henceforth we recommended you purchase only LEDs with waterproof abilities.

4. SHIELD

Jeep LED Tail Lights are exposed to all-terrain weather. Right from Rainy Weather to Dry all types of weather are experienced by Tai Lights. Henceforth make sure that the Tail Light is manufactured from good quality premium materials. High-quality materials such as ABS plastic & PUMMA lens are recommended. These materials are specially designed to provide more durability to the product. There are many cheap counterparts available in the market but don't get manipulated. The shield is a very crucial component of a LED Jeep Tail Lights. People tend to avoid these components but small aspects matter the most. If you want good –quality Jeep LED Tail Lights then these aspects must be considered. These materials are skilled in protecting the internal circuitry from the external weather and dust. Make this as a golden rule of choosing the Jeep LED Tail Lights with these materials only.

5. FIT SIZE

There are varieties of Jeep LED Tail Lights available in a different size in the market. Make sure that before you purchase the Taillight you measure your Jeep wrangler. In any case, it is observed that the user tends to purchase an Oversize Jeep LED Tail Lights. Commonly users check aspects like brightness, waterproof ability, lifespan, etc. But they forget to check the size of Jeep LED Tail Lights that would be ideal for their jeep. This mistake leads to purchasing inappropriate products. Henceforth before purchasing Jeep Lights to make sure you know which size would be according to your requirement.

6. DOT CERTIFIED

There are thousands of LED Tail Lights manufacturers in the market with uncertified products. A good high-quality Jeep LED Tail Lights can be recognized with the DOT certification logo like LX-Light Dot Approved LED Tail Lights 4D. According to Law enforcement in the USA and Europe un-certified tail lights are subject to risk. Even Jeep LED Tail Lights certified with SAE logo are recommended. This certification is also similar to the DOT certification. Many countries have rules regarding tail lights. In order to maintain the safety and transport rule of the country. Certification is a vital proof that the product is verified and effective result. This keeps you safe from legal allegations followed by other safety rules. It will take only a minute to check whether Jeep LED Tail Lights is certified or not. Henceforth using certified Jeep LED Tail Lights is highly recommended. This is one of the unpopular aspects that are considered before purchasing Tail Light. Many people rarely know about this certification. Resulting in purchasing bad-quality Tail lights and wasting their money unnecessarily.

Final Thought

Jeep LED Tail Lights is one of the important parts of a jeep. Not just for convenience while driving but also for the safety of the passengers and drivers. Henceforth a good quality Jeep LED Tail Lights is all that you require.